What is a Hood Insulation Pad? – DIY Under Hood Insulation

It might be usual to start noticing that some sounds are getting louder in your car after long years of usage. In most cases, people think it results from the damaged engine, while a damaged hood insulation pad often causes this. 

But it’s still advisable to check your car’s engine first to know if the fault is coming from there and if nothing is wrong with the engine of your vehicle, it is caused by a damaged hood insulation pad.

Hood insulation pads get worn out or damaged after long years of usage because of heat exposure. Although not all cars come with an underhood insulation pad, it will certainly get damaged.

The noise it produces is the greatest challenge some car owners face especially making a long journey or listing to music. 

What is a hood insulation pad? This article will let you know what a hood insulation pad is and how to install a hood insulation pad DIY. So read more!

What is the Purpose of Hood Insulation Pad?

As you already know that not all cars come with a hood insulation pad. When you lift your car hood and discover there is no layer-like fabrics material there, then it doesn’t go with it.

Hood insulation pad is very beneficial to both you and your car. You can never compare a vehicle with a hood insulation pad to a car without a hood insulation pad. That is because the insulation pad does not only block sounds but also does many other things.

Below is the primary purpose of the under-hood insulation pad.

1. Blocks Sounds

An insulation pad is an excellent material use to achieve a great atmosphere while driving. It blocks about 50% of sounds coming from the car engine and about 30% of the road noise.

2. Prevent Paints on the Hood from Peeling Off

A hood insulation pad is perfect for keeping paints on the hood from peeling off easily. Without an insulation pad, the paints on the hood will easily peel off because of the high temperature from the car engine.

So the insulation pad serves as a protective layer to the hood and the paint on it, which you can not achieve without a hood insulation pad.

3. Reduces Vibration

The insulation pad helps to reduce the vibration coming from the car engine. Without an insulation pad, the vibration will eventually make its way to your car cabin, which in turn will be a very be a mess.

4. Keep Fire From Spreading

Hood insulation pad assists to keep out fire most car engines might produce at times from spreading all over other places. That only will serve you from frequent change one part of your car or another.

5. Decrease Overheating of the hood

A car hood tends to overheat because of the heat coming from the high temperature of the car engine compartment. A hood insulation pad will help lessen the effect that the heat from the engine will impact the hood by stopping it from overheating.

The material helps to fasten the cooling of a car AC and keeps the additional heat from the sun from reaching the car engine and other parts of the car.

What is a Hood Insulation Pad?

What is a Hood Insulation Pad?

A hood insulation pad is a soundproofing material that performs essential tasks in a car. It helps to retain heat and blocks sounds in a vehicle. It is also called a hood shield, hood liner, or hood pad to cover the car hood’s base surface.

It is made of rubber and polyether urethane-like material with aluminum foil. These materials are effective in dampening sounds and heat. Some are made of acoustic foam, fiberglass which also works well in absorbing and sound vibration.

What You should look Out for when Purchasing Under Hood Insulation Material

You have to look out for certain things when purchasing hood insulation materials to make the right choice. 

You can either use a hood liner or sound deadening mats. Hood liners work well on heat insulation, while sound deadening mats work well on sound insulation as well as heat insulation.

It is to let you know that you have two options when purchasing hood insulation material. The following are what you should look out for when buying insulation materials to ensure you make the right choice to meet your needs. 


Cost is one of the things you have to consider before buying an insulation material. Price plays an essential role in the quality of the material. 

That’s why most people will go for the costly ones because the more expensive the material is, the better it works. But if you are on a budget, some pock-friendly ones can serve you well also.


Thickness also influences the performance of the material. You can not expect the thinner ones to work just exactly like the thicker ones. The thicker ones will always give you better sound insulation than the less thick ones.


Of course, mass and thickness work hand in hand. However, a mass-heavy mat may not need to be thick. So it would help if you looked out for mass-heavy ones for better performance.

The quantity you need

The quantity you need all depends on the size of your hood panel. Most brands come in a roll while some in sheet, so you should measure the area to determine the amount of material you need. 

Don’t make the mistake of insulating some around and leaving some. You should make sure you protect the entire hood if you want excellent work.

Ease of use

Make sure you get the ones that come with self-adhesive backing to make the installation work very easy for you expect you want to stress yourself.

Best Hood Insulation Material

There are many hood insulation materials in the market. Combining some of them can give you a fantastic protective feature in your car. Below are the best hood insulation materials you can use.

1. Sound deadening mats

What is a Hood Insulation Pad?

Sound deadening mats weigh number one for sound insulation under a hood. They are very effective and easy to install. If you are looking for an excellent sound deadening material, go for sound deadening mats that use mass-loaded vinyl or Noico sound deadening mat. 

Because they serve all soundproofing purposes and are relatively cheap, they are heavy and do not vibrate when sounds waves touch them, even when the sound is very high. 

Also, you can use them on other surfaces like the floor of your car, doors, and roof. You don’t have to waste them if they remain after installing them under your hood.

Noico sounds deadening pad comes with a self-glue backing, making it very easy for DIY hood insulation. You have to ensure they are installed correctly to avoid wasting the material. The following are other good mats to consider.

Dynamat sounds deadening mats

Dynamat is also an excellent brand to use on your hood. It comes with a self-adhesive, which also makes it easy to install. 

However, they come in different types to suit other parts of the car, and it does not come in a roll instead of in a sheet.

Read More: Dynamat Vs. Noico Review – Which is better


Hushmat is another best choice to go for. It is made with mass-loaded vinyl and can block up to 40 to 45% of sounds when used in a car. Although it is a bit costly than Dynamat, it is the best among them.

2. Hood liner

What is a Hood Insulation Pad?


Like we said earlier, you should look out for materials when you talk about hood insulation, a sound deadening mat, and a hood liner. Some people may also prefer hood liners to sound-dampening mats.

Unlike sound deadening mats, a hood liner comes with a self-adhesive backing, making it easy to be installed but it’s a bit thicker than a noise deadening mat. That’s is why it works well in thermal insulation. It also comes in a perfect size for easy cutting.

Dynamat Hood liner

Dynamat hood liner is top-notch at decreasing the measures of sound coming from your car engine. Even though it is exceptionally thick, it comes with a self-adhesive, although it’s a bit complex. 

It will help if you make the correct estimations before cutting the material. 

You’ll see that most hoods aren’t level, and they might have curves and raised surfaces which can make cutting the material somewhat perplexing. Stay with your estimations, and you ought to be okay. 

When applied accurately, this explosive hood liner remains safely set up because of its high tack self-glue. 

The Dynamat hood liner likewise has a beautiful sparkling metallic appearance with a mix of open and shut cells to retain sound waves, disseminate them, and also helps to resist water and oil.

FatMat Hood Liner

The FatMat hood liner is somewhat like the Dynamat hood liner. This specific item comprises acoustic foam supported with aluminum foil, permitting both sound and warm protection properties. It likewise has some extra warmth-safe components which assist it with shielding the paint on your hood from the warmth falling off of your motor. 

In the meantime, the acoustic froth properties will lessen the degree of commotion prompted by vibrations coming from the motor. 

Introducing this item is simple as it accompanies a bare strip and sticks application measure, and as long as it’s introduced effectively, you will see the results immediately. 

3. Sound deadeners and hood liners 

Like we said before, you can pick one of these materials, or you can join them. Joining them would presumably be a smart thought since you will get serious about the sound protection and warm protection. 

Nonetheless, you might be thinking about how you introduce a sound deadener and a hood liner together. 

You don’t have to stress over that since the interaction to do this is excessively easy. The vast majority of these items accompany self-glue backing and are DIY well disposed of. 

To begin, you should cut the two of them into a proper shape. Then, eliminate the expendable support from the sound deadener and spot it on the hood. 

Introduce the hood liner on top of the sound deadener, which currently goes about as the base. Once finished, you will presently partake in the advantages of the soundproofing and warm characteristics of the two items. 

Recall that these items go inside the hood, so if you don’t pick any of our decisions, choosing items produced using heat-safe materials is essential. Inability to do so will permit the warmth coming from the motor to harm the establishment and may even place you at serious risk. 

How to Install DIY Hood Insulation Pad

Prepare the tools

It is the first thing to do before proceeding with the other guide on installing a hood insulation pad. The primary device you’ll require is something to cut the material to the state of your hood. 

It can either be some uncompromising scissors or a utility blade. On most occasions, these materials are self-cement, so you will not require any paste or cement. You can utilize a roller assuming you need it, as it will ensure that the liner is level and even. 

Eliminate existing hood insulation

If your current hood insulation is worn or harmed, you should eliminate it before introducing the new one. Some of the time, eliminating the existing hood insulation can give you trouble. 

If it does, you can utilize a level blade to lift and strip the corners. 

You can continue eliminating it manually; however, it requires some carefulness not to harm the paint. 

Clean off any grime or dirt 

Take a look at the hood board and clear off any grime or soil that you see. The hood should be entirely spotless to ensure that the cement can work as it should and hold appropriately. Contingent upon how grimy things are, you might have to utilize a degreaser to eliminate any oil development. 

Use the old insulation as a guide

This progression works for the people who had insulation introduced previously. After effectively eliminating the old insulation, you can put it over the new liner material and use it to protect the new one.

Cut the insulation

If you don’t have old insulation to use as a framework, you will need to cut the sheets into shapes that match the plunges in your hood board. 

In the wake of cutting shapes to coordinate with every one of the plunges, you will then, at that point, need to cut the remainder of the material into strips which you will use to cover the curved lines between the plunges.   

Strip and stick 

To apply for protection within the hood board, you need to ensure that everything is cut on your hood size. That is because once you join the insulation to the hood board, it will be tough to eliminate. 

If that does occur, you figure out how to eliminate it; you’ll need to utilize another piece of material since the other would have lost the vast majority of its glue properties. 

Eventually, you can go through it layer for better outcomes on the off chance that you have an abundance left behind. 

Utilize a roller 

You can use a roller to guarantee no wrinkles or overlays once you have applied the insulation. The roll will permit your installation to look smooth and flawless and even better assist the insulation pin. 


You probably need to install a hood insulation pad in your car if your car did not come with it or the one your vehicle came with is old because the joy of driving without your car producing any sound is something you wouldn’t like to miss.

We do hope the question “what is a hood insulation pad” has been answered.

Don’t forget to comment below and share on your social media platforms to reach out to people who value this information.